GEOTHERMAL

Geothermal energy originates from the heat retained within the Earth since the original formation of the planet, from radioactive decay of minerals, and from solar energy absorbed at the surface.[2] Most high temperature geothermal heat is harvested in regions close to tectonic plate boundaries where volcanic activity rises close to the surface of the Earth. In these areas, ground and groundwater can be found with temperatures higher than the target temperature of the application. However, even cold ground contains heat, below 10 feet or 3 meters, the ground is consistently 12.8 °C (55 °F) in moderate climates, and it may be extracted with a heat pump.

GEOTHERMAL HEAT PUMPS FAR SUPERIOR

Few people are even aware that geothermal heat pumps are even an option when it comes to their heating and cooling needs. Most of us are aware that electric heat pumps are available but the new generation of geothermal units are just now gaining popularity. These state-of-the-art heat pumps provide the same continuous and even heat or cooling just like the electric pumps but they are far more efficient at doing so. So, if you are in need of a new heating/cooling system for you home or business, here are some reasons to consider purchasing a geothermal heat pump.

Let’s face it—the environment is becoming a bigger and bigger issue for everyone. We are all looking for ways to use less energy and pollute less. Geothermal heat pumps are simply the most environmentally friendly heating and cooling units available today. Plus, no system can rival a geothermal heat pump when it comes to energy efficiency or cost effectiveness. So, not only are these heat pumps environmentally friendly, they ultimately cost less to operate and consume less energy while doing so.

However, it is also very true that geothermal heat pumps will cost you more to purchase and install than other options. However, depending on the location and the cost of the other heating/cooling option, geothermal heat pumps will recover those added up-front costs within 6 or 7 years. After that point has been reached, geothermal heat pumps will save you money over the other heating/cooling options each and every single year it is in use. In the long run, these new age heating and cooling units will prove to be the most cost effective option available.

Geothermal heat pumps cool your home in the summer by removing excess heat and humidity from the home. This heat is then transferred to the earth where it naturally dissipates. The process is much quieter and less obtrusive than found in conventional heat pumps.

In the winter, geothermal units heat your home by forcing fluid through pipes buried in the ground. This fluid picks up radiant heat coming from the ground. The heat absorbed by the liquid is then compressed within geothermal heat pumps in order to raise the temperature. The heat is then distributed throughout your home.

Geothermal heat pumps also offer the added advantage of providing homeowners with free or drastically reduced hot water. This savings alone can add up to hundreds, potentially thousands, of dollars during the lifetime of a geothermal heat pump.

Although geothermal heat pumps are more expensive to purchase and install, they become the less expensive heating and cooling option as time progresses. Therefore, even if you are planning to move in the next few years but need a heating/cooling system right away, geothermal heat pumps may prove to be true selling points later on down the road. So, no matter what your plans for your home, installing a geothermal heat pump will always be a wise investment and provide you many worry-free years of heating and cooling comfort.

Choosing The Best Geothermal Furnace Repair Contractors Near You

If you’re considering a geothermal system, you’ve likely heard of the environmentally friendly and significant sustainability of it. These heating and cooling systems are highly efficient and utilize a stable and renewable source of heat for regulating internal temperatures, making them a very appealing option for those looking for alternative heating and cooling systems. So, just how do they work and what makes them so stable and energy-efficient? To put it simply, geothermal energy is achieved by tapping into the natural heat produced by the Earth’s core and utilizing this heat to regulate the internal temperature of your home. Since the core of our planet sustains temperatures near 7200 degrees Fahrenheit, it’s easy to understand how this could be a continual source for heat nearer the surface. There are many design variations with these types of heating systems, but in general, geothermal heat works by pumping the warmer air from deep in the ground, up and into the home via ductwork. By the same token, it can also use this heat to warm water for use in showers, sinks, and laundry usage.

Residential Geothermal Heating Installation In Battle Creek MI

Despite the positive impact on the environment, some homeowners are cautious about upgrading to a geothermal unit because of the more costly installation and purchase prices upfront. While it’s true that these systems tend to involve a larger initial investment than traditional HVAC units, their energy efficiency and eco-friendly operations will pay for themselves in a matter of a few years. Overall, these units operate at an efficiency rate of 400 percent, meaning they only use one unit of electricity for every four units of heat generated. Since traditional heating and cooling systems are responsible for a bulk of your energy utility expenses, it’s not hard to understand how implementing a system that’s four times more efficient at utilizing energy will save you big time on your energy bills. In addition, the overall system has a much longer life expectancy than traditional HVAC units. With most installed geothermal systems, you can expect a life span that exceeds decades of efficient operation versus the standard 10-15-year life cycle of electric or gas heating and cooling systems.

Geothermal HVAC Heat Pump Installation Contractor Serving Battle Creek

At CTI Mechanical, we specialize in bringing our customers the latest in geothermal technology and service. We are passionate about maximizing the efficiency of our customers’ heating and cooling systems while minimizing the footprint on our environment. It’s for this reason that we specialize in these state-of-the-art climate systems. Geothermal heat pumps are a quiet and environmentally friendly technology for heating and cooling homes that’s gaining popularity today. Due to their ability to drastically reduce energy bills and their significantly longer life expectancy, these units will essentially pay for themselves within the first 6-7 years after installation. From there, they only stand to gain positive cash flow for homeowners, a fact which helps soften the higher initial costs at the time of purchasing them. In addition to the dramatic energy savings and impressive eco-friendly operations, these climate systems are also a safer alternative for families as well. Since heat is transferred via piping buried in the ground, they do not depend on traditional means of operation involving combustion. This means that by utilizing the heat from deep within the Earth versus traditional heating systems, homeowners no longer need to worry about potential carbon monoxide leakage of heat pumps or furnaces. There are countless ways in which geothermal heating and cooling systems are far superior to other options for homeowners. CTI Mechanical specializes in staying up to date on all of them in order to provide our clients with the latest technologies and energy efficiency.


CTI Mechanical Contractors, Inc.

1320 Columbia Avenue East
Battle Creek, Michigan 49014

Phone: 269-441-1900
Fax: 269-441-1901
E-Mail: sales@CTIMechanical.com

Contact CTI Mechanical

*
*
*